Making robot clothes yourself
Plenty of venues dress their robots in pieces made by a staff member who sews, or by a local maker. Home-made works well for simple shapes and short runs, provided the fabric, fasteners and pattern are chosen with the robot in mind.
Choosing fabric
Pick for the setting first and the look second.
Cotton drill and canvas
Firm, easy to sew and holds a shape. Good for aprons and panels, and it launders well.
Polyester and blends
Light, colourfast and quick to dry. Suits capes, sashes and anything washed often.
Felt
Cheap and doesn't fray, so it's handy for ears and cut-out shapes. Many felts wash poorly, so treat it as short-term.
Coated fabrics
PVC-coated or laminated cloth shrugs off spills. Best for food service, though trickier to sew around curves.
Fasteners
Hook-and-loop tape
The usual choice: quick, adjustable and easy for anyone to use. Sew it onto the garment. Avoid sticking the adhesive-backed kind straight onto the shell unless the supplier agrees, as the glue can be hard to remove.
Elastic
Run through a hem or channel, elastic grips a curved body without any fixings. Too tight and it rides up; too loose and it slips down.
Press studs and ties
Useful for joining two halves of a garment to each other rather than to the robot. Keep ties short and away from the base.
What to avoid
Pins, loose buttons and long drawstrings can drop off or dangle. Check with the supplier before relying on magnets near the robot's electronics.
Simple patterns
Most robot garments come from a few basic shapes. A tube or wrap-around panel covers a cylindrical body: take the circumference, add overlap for the fastening, and cut openings where sensors and the screen sit. A tabard hangs from the top and is open at the sides. A hat is a band sized to the head with a shape on top.
Draft on paper first, tape the draft to the robot, and mark every opening while the robot is in front of you. Only transfer the marks to fabric once the draft sits right.
Finish openings around sensors with a bound or hemmed edge, so loose threads can't fray across a lens over time.
Pre-wash washable fabric before cutting, so any shrinkage happens before the garment is made rather than after its first trip through the machine.
Thick fabric and seam allowances add bulk. If the robot docks into a snug charging station or passes through narrow gaps, check the finished piece doesn't make it noticeably wider, because the robot won't know about the extra width.
Keeping the cost down
Offcuts from upholsterers or uniform makers, op-shop fabric and leftover sign vinyl can all be suitable. One accurate base pattern, reused each season, saves the most time.
Make a base piece once in a neutral colour and change only the add-ons, such as ears, a hat or a sash, for each occasion.
When to call in a professional
Bring in a maker when the shape or setting gets hard.
A professional costume maker, upholsterer or wrap installer is worth considering for complex shapes with many sensor openings, matching sets for several robots, materials that must hold up to a strict cleaning regime, or anything stuck to the shell. They can cut accurately and turn out identical pieces.
Give them the measurements, photos and no-go zones you've already mapped.
Before anything is fitted, work through our sister guide's fit and safety checklist for dressed robots.
Curious about service robots more broadly? See robotx.au.